Chapter 20 More Uses Around the House

I put well over 60,000 miles on a set of tires and sold the car with them still going strong. The car had over 260,000 miles on it when I sold it! Below you will find the methods and Tunings for these kinds of experiments. These Tunings originally came out of the research from the Search Foundation, which is no longer around.

Procedure:

1. Begin with Normal Start-up.

2. Place a Sample in the Cell. (This can be a photo as in the case of something large like your whole house, or a portion of the object like a small snip of a carpet. As an alternative to using a Sample, you can also wrap the output cable in either direction around the object as in the case of a can of paint.)

3. Choose the appropriate Tuning(s) from the list below, and type into the computer, i.e. “Disperse oils 15.42-94.33” for improving your detergent. You can also make a custom program and sequence the Tunings automatically.

4. Place the Amplitude Knob at 100, and the Measure Switch in the Balance position.

Possible Tunings

FOR IMPROVING DETERGENTS:

Break water surface tension..........................33.56-64.64

Release bonding of organic molecules (soil, stains) ........................................................................33.56-65.37

Disperse oils..................................................15.42-94.33

Soften water...................................................15.23-20.22

Strengthen fabric fibers.................................18.24-34.23

IMPROVING PAINTS:

Longer lasting................................................18.23-29.25

Washable/durable .........................................54.66-44.56

IMPROVING METAL TOOLS, KNIVES & MISC.:

Make harder...................................................13.33-33.46

Make tougher.................................................40.24-48.44

Hold sharp edge.............................................18.22-18.22

Scotch Guard.....................................................43.3-62.1

Protect house........................................................30.3-46

Notes: Word Tunings work just as well as numbers and are often times easier. For example, the way I balanced my car was to take a picture of the whole car and then I typed into the computer, “Restore to original IDF pattern.’’ This acted as a ‘catch all’ for all the parts of the car. However this is very general so I added some statements like “IMPROVE OIL VISCOSITY”, “ELIMINATE TIRE WEAR”, and “SMOOTHER RIDE” for the specifics. I used the Improving Metal Tunings listed above on the piston rings and cylinder walls. The bearings in the connecting rods can also use special attention.

Another simple experiment involved sharpening razor blades. After over twenty years of wearing a beard, I took up the ancient art of shaving. I began with the cheap, throw away razors as I wasn’t totally convinced of shaving as a way of life. I found that a normal double edged blade lasted six to eight days with an average of one to two small nicks. If I used the blade any longer I noticed that my face ended up looking like a battle field with seven to ten not so small nicks.(ouch!)

I took an old blade (eight days used) and put it on the Stick Plate and typed in “SHARPEN BLADES AND RETURN TO ORIGINAL CONDITION”. I balanced it for about an hour and the next day tried the blade. Amazing! Smooth and only one small nick! I used the blade for seven more days and had very good shaves until the last day, (back to the battle field). I tried the same process again with the same blade, but this time without success. It would seem that the metal was able to recrystallize the first time, but was not able to do it a second time. More experimenting will be necessary... (Last minute update) Trying a different approach, I decided to be proactive and be preventative. I potentized a new razor with the Tunings, Make Harder, Make Tougher, Hold Sharp edge. So far as this goes to print, I have been using the same razor for over four weeks! It looks like it isn’t going to give up at all. It is shaving like it is about two to three days old. Average is about 1-2 nicks!

Update 2011... I am up to about 3 - 4 months now with the same blade :).

Question:

Q. Is there anything that would not benefit from using the SE-5 1000 for balancing.

A. No. Nothing that I am aware of.